|
|
 |
 |
 |
| |
共 3
页 第 3
页 |
<<上一页 |
点击图片可放大 |
|
Y321型手摇捻度仪
Y321 Manual Twist Tester
用于测定粗纱的捻度。
Used for testing the twist of roving.
适用标准Standards GB/T2543.1 & IS02061等。
|
| 试验方法Testing Method |
直接计数法Count diectly method
|
| 试验长度Testing Length |
0～300mm
|
| 测量范围(捻)Testing Range(twist) |
1～500
|
| 外形尺寸Dimensions |
L600×W120×H220mm
|
|
点击图片可放大 |
|
Y201A型棉卷均匀度机
Y201A Lab Evenness Tester
用于测定棉卷一米(或码)长度片段的均匀情况，实际长度，核算棉卷的伸长率。
Used for this product fils for testing the even degree of
one -metre -length(1/2m,1/3m)lap and the actual length of
lap at the same time.
|
| 棉卷辊周长Lap roll girth |
1.0m
|
| 棉卷定长规格Lap specified length |
1.0m、1/2m、1/3m
|
| 电子秤Electronic balance |
最大称量Max scale:6000g分度Scale:1.0g
|
| 外形尺寸Dimensions |
L1400×W665×H1490mm
|
| 电源Power supply |
AC380、400W
|
|
点击图片可放大 |
|
Y311型条粗条干均匀度仪
Y311 Sliver and Roving Pegularity Meter
用于检测棉、毛、绢等条子及粗纱均匀度。
Used for test evenness of sliver and roving of cotton ,wool,twine,pun
silk and silk etc.
适用标准Standards:GB/T3701、W04001等。
|
| 导轮槽宽Bowl Width of Guide
Wheel |
1.58mm,3.17mm
|
导轮线速度
Linear speed of guide wheel |
669.35mm/min
|
| 杠杆比Ratio between levers |
1:100
|
| 外形尺寸Dimensions |
L540×W280×H510mm
|
|
点击图片可放大 |
|
YG025型电子缕纱强力仪
YG025 Electronic Skein Strength Tester
用于测定棉、毛、化纤等纺织原料纯纺，混纺纱线的缕纱强力。
Used for measure strength of skein of pure and blend spinning
of cotton ,wool and chemical fiber etc.
适用标准：Standards:GB/T8696,IS06939.
|
量程、精度、分辨率
Range、accuracy & resolution |
2000N ±0.5% 0.1N
|
| 隔距长度Gauge |
450mm(最大Max)
|
| 最大伸长Max elongation |
250mm
|
| 拉伸速度Draw speed |
600mm/min
|
| 功能Functions |
定速拉伸Draw at specified speed
|
| 外形尺寸Dimensions |
L700×W550×H1280
|
|
点击图片可放大 |
|
Y301B型条粗测长机
Y301B Silver & Roving Length Tester
用于摇取棉、毛、绢等条子和粗纱一定长度，确定其均匀度。
Used for rocking stated length of cotton,wool and spun silk
siver or roving,and to measure its evenness.
适用标准：仪器符合国内外常用测试标准。
Standards:The instrument is in conformity with the foreign
and do-mestic normal standars.
|
| 滚筒周长Rolling drum perimeter |
1000mm
|
| 滚筒宽度Rolling drum width |
250mm
|
| 压辊直径Press roll dia. |
Φ62mm
|
| 喂入头数Number of feeding
ends |
2
|
| 外形尺寸Dimensions |
L350×W500×H600
|
|
|
|
| |
共 3
页 第 3
页 |
<<上一页 |
|
|
|
